Product overview
The SR1-1 Car Tire Sidewall Remover simultaneously removes both sidewalls from a tire. It is easy to operate, simply:
- Place the tire over the two rollers
- Pull down on the right lever, the tire begins rotating
- Pull in on the left lever, the cutting blades engage
- Remove sidewalls and tread
While both sidewalls are cut in less than five seconds, total production will vary according to availability of tires, location of disposal pile, and operator efficiency. A conservative production rate of three tires per minute is common, with four to five tires per minute possible when conveyors are used to bring the tires to the operator and to take away the cut pieces. The blades are standard utility knife blades (extra heavy duty) with a lifespan of approximately 400-600 tires per blade. The blades can be changed in a matter of seconds by simply loosening two thumbscrews, sliding out the old blades and in the new, then retightening the thumbscrews. The only maintenance required is regular lubrication to the drive chain and several grease fittings. All parts are available from www.EAECO.com, however, most common wear parts (sprockets, chain, bearings, etc. ) are standard "off the shelf" parts and are typically available locally, allowing for quick repairs.
Available to see running in our warehouse.